|
The SkyDancer SD-260 was an American aerobatic Homebuilt biplane that was designed and produced by SkyDancer Aviation of Louisville, Kentucky, introduced in the mid-1990s. When it was available the aircraft was supplied as a kit.〔Purdy, Don: ''AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition'', page 252. BAI Communications, 15 July 1998. ISBN 0-9636409-4-1〕 ==Design and development== The SD-260 featured a strut-braced biplane layout, a two-seats-in-tandem open cockpit, with an optional bubble canopy, fixed conventional landing gear with wheel pants and a single engine in tractor configuration.〔 The aircraft fuselage was made from welded 4130 steel tubing. Its span had a wooden structure with four ailerons, a wing area of and was covered in doped aircraft fabric. The wing was supported by interplane struts, cabane struts and flying wires. The acceptable power range was and the standard engine used was the Lycoming IO-540 powerplant.〔 The SD-260 had a typical empty weight of and a gross weight of , giving a useful load of . With full fuel of the payload for the pilot, passenger and baggage was .〔 The standard day, sea level, no wind, take off with a engine was and the landing roll was .〔 The manufacturer estimated the construction time from the supplied kit as 1200 hours.〔 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「SkyDancer SD-260」の詳細全文を読む スポンサード リンク
|